manufacturing business for sale - Chrome Electroplating

Description

Commercial Electroplating/ Metal Polishing Business For Sale
. Existing and permitted to do plating business at this location. Turn Key Decorative Chrome Electroplating Set up.   Includes Tanks, rectifiers, heaters, solutions and all necessary components to produce Decorative Chrome Electro-Plated finishes including: Acid Copper plating tank, Cyanide Copper plating tank, Bright Nickel plating tank, Chrome plating tank.  Polishing machines for metal prep prior to plating are also included. Chrome tank can also produce Thin Dense Chrome plating. Additional processes include Zinc and Electroless Nickel Tanks.  Existing commercial accounts and repeat non commercial customer list, business name, good will, etc.  Assume lease in current leased building or move it to your location. Also willing to sell just assets. (Must purchase all.)
Tank sizes:
Chrome 372 gallon, approximate dimensions 6.6 ft by 3 ft by 3.5 ft
Nickel 384 gallon capacity, approximate dimensions 7 ft by 3 ft by 3.5 ft
Acid Copper 170 gallon capacity,
Cyanide Copper 102 gallon capacity
Zinc 470 gallon Capacity
Misc acid and rinse tanks
New, unused tank approximately 7 ft by 3 ft by 3.5 ft
Willing to "Lease to own assets" at this location on a monthly basis. Serious inquiries only.     Local Pick Up Only.
METAL ROOFING AND SIDING ROLL FORMING MACHINE
NEW 16 Station PBR - R-Panel Roll Former
36" panel, ribs on 12" centers, 1 1/4" high coil width 42 3/4"-43"
USA Tooling Design
- Special Roll set in stand 16 - by adjusting the stand tighter it will reduce the width of the panel, looser it will make the panel wider so the exact panel width of 36" may be achieved even with variations in coil strength.
Tool steel roll dies, hardened, and chrome plated.
UP-CUT-SHEAR - DOUBLE CYLINDER
The up cut shear makes stacking of formed panels much easier. The micro burr on the end of the formed sheet is turned up by the up cut shear, so it will not scratch the sheets in the stack. The end of the newly formed sheet can slide on the top of the sheet stack, it does not need to be kept off of the stack to avoid scratching as with a down cut shear.
Designed, Final assembly, and Testing in USA
Includes 10,000 lb manual un-coiler and stand
Power is 220v 3 phase 60hz, single phase converters are available
FOB Sunnyside Wa.
Loaded on your truck
Video #1 -->
https://youtu.be/nShPgMehwR4
Video #2 -->
https://youtu.be/XHVLHvV5Omw